Memaparkan catatan dengan label Notes. Papar semua catatan
Memaparkan catatan dengan label Notes. Papar semua catatan

23 Februari 2011

Internet Infrastructure (Part 1)

Using Telephone Line To Connect To The Internet
You  Need:

  1. Modem: to transmit data over telephone line and software that allows the OS interact with the  modem
  2. Operating System: utility that allows you to configure the modem to connect to a specific ISP
  3. ISP User Information: tel. no, user ID, password, and other information need.
MODEM
• responsible for managing communication between device and can be
reffered as Data Communication  Equipment (DCE) device
Data Terminal Equipment(DTE) using DCE to communicate with another device.

STEP
• Install and configure modem
if external modem: insert modem to a serial port
if internal modem: insert expansion slot (PCI slot) inside a computer.
• creating dialup connection: install dialup adapter
Dial-Up Networking: process enable a computer to use a modem and a telephone line to connect a network

• configure TCP/IP to connect to the cable modem
  (Windows 7, Windows XP, Windows 2000; TCP/IP is automatically installed; Windows98 must be isntall TCP/IP)


Connection Using Cable Modems
• the cable modem connect to a regular TV coaxial cord; which then connect to TV cable wall outlet.
• cable modem has an electrical connection to provide power to the box.


Connecting a PC on a LAN to the Internet
• the connection of the LAN always uses a network card
• but the connection to the ISP could be a
     network card
     modem
     •or ISDN card


Physically And Logically Dividing a Large Network
you can physically divide a network using hardware devices (segmentting the network)
you can logically divide the network using software setting (subnetting)
Bridges And Switch
more intelligent than hubs
•make decisssion involving whether to allow trafic to pass or route that traffic
use MAC address to subdivide a network into physical segments
Routing Table
is a database stored within a router that is used to find the best network path
Subnet Mask/Network Mask
used to defined which portion of an IP address identifies the network and which portion identifies the host

How Data Travels Across Interconnected Networks
Routers:
responsible for helping data travel across interconnected network
• function as both a bridge and a router
•like switch route use table to determine the best route
unconcerned about the data, but concerned about the destination of data
•several protocol: RIP, BGP

Default Gateway
A default gateway is the router to which your computer addresses packet information for data destined for a computer on another network.


Internet Infrastructure (Part 2)

  1. Domain name are assign because ip address number are difficult to remember.
  2. The Last Segment = Suffix = Top-level Domain
  3. The First Word = identify subcategory = Canonical name (CNAME)
  4. Domain Name and ip address do not have permanantly related
  5. Two name resolution service
    • Domain Name System
    • Windows Internet Naming Service
     6. DNS has 3 logical Component:
    • computer searching for the ip, resolver
    • server contain information, name server
    • resolve domain name, namespace
     7. Discovering an ip address for a given domain = Address Resolution
         Process called = reverse mapping, reverse resolution
         network solution maintains servers = root servers
    8. Network  that support DNS ; primary name server,secondary name server(slave name server)
    9. The group of networks = name server's zone
        A zone can have a caching-only server that does not keep authoritative information
   10. Name server keeps entries for each domain name = resource record, DNS record
  • Address: Identifies the ip address of a domain name
  • CNAME: An alias that lets a host can be access
  • Name Serve: Identifies the IP add. of the primary and secondary name server for domain
  • Mail Exchanger: Identifies the mail exchanger on a domain
  • Start Of Authority (SOA): Identifies the ip address of the DNS server is the primary authority for a domain
  11. DNS began envolving in 1983 =  Host Table
  12. Directory Server = store info. about people, host and other resource
  13. Directory Access Protocol(DAP); X.500 = to allow directory service communicate with each other
  14. Lightweight Directory Access Protocol(LDAP) = to streamline the process

X.500 And LDAP Implementation
  • eDirectory(Novell Netware)
  • active Directory(Windows)
  • open directory(apple)
  • apache directory servere 
  • redhat directory serve
  15. LDAP was design to run over TCP and can be used on the internet or intranet
  16. LDAP has less code than DAP
  17. X.500 specifies how global directories can be structured

Advantage of X.500 and LDAP
  • Synchronization=directory on one server can be synchronize with the directory on another server
  • Replication=part of directory database on one server can copy itself to another server
  • Scalability=there is no limit to the size which the directory can grow
  Cache Servers
  Improve performance by caching data so that the internet is reduced

  Mirrored Servers
  Carried the same data and service as another server

PPP(Point to Point protocol)
  •intranet access point by telephone line
PPoE(Point to Point Over Ethernet)
  •adapts PPP to work with Ethernet
ISDN(Integrated Service Digital Network)
  •tech. develop in 1980, uses regular telephone line or dialup connection
Broadband
  •refer to any type of networking that carries more than one type of transmission

T Lines & E Lines
•introduce in 1960
•use multiplexing, a process of dividing a single channel to multiple channel that can carry audio, video, or other.
•T lines- America; E Lines- European

X.25 And Frame Relay
• packet-switching communication protocol design for long distance data transmission
• both use PVC (permanent virtual circuit)

ATM(Ansyncronous Transer Mode)
• fast network tech. that can be used with LANs as well as WANs
SVCs(Switched Virtual Circuit)
• point to point connc. that depend on the atm to decide the best path to send data
Mesh Topology
• provides multiple point-to-point links between router in wide area network.
• router search out multiple path and determine the best path

    7 November 2010

    Video Pre-Production

    Introduction

    Video production is concerned with non-broadcast program making. Productions are recorded closed-circuit on videotape, distributed and viewed by a small audience


    The Production Team

    •Production group vary in size, according to the organization and the complexity of the production
    •Titles and responsibilities differ.
    •In some groups there are strict demarcations, while in smaller units work is shared




    Types Of Video Production
    •Live Event Coverage
    •Instructional Video
    •Informational Video
    •Corporate Video

    Video Pre-Production Process

    • Idea Generation 
    • Treatment / Plan 
    • Storyboard and Scripts 
    • Shot List and Running Sheet 
    • Location 
    • Casting 
    • Budgeting 

    Idea Generation
    Different Genres
    A genre is a type of text, a format for communicating information.
    Here are some examples:
    - comedy
    - action
    - mystery
    - science fiction
    - documentary
    - music video
    - commercial.

    Treatment/Plan
    The treatment is a written document that summarizes the story line (plot) of the video or film.
    Usually the writer and the director get together to convey the idea to a producer.

    Storyboard
    •A series of diagrams that are used to depict the composition of a video segment.
    •Each diagram consists of: a sketch of the video image; a brief description of the visual; notes for the camera operator; the details of the desired audio that will accompany the visual; and an estimate of how long the segment will be.

    Script Writing
    •Planning is an essential part of production and the script forms the basis for that plan
    •It helps the director to clarify ideas and to develop a project that will work
    •It helps to coordinate the production team


    Shotlist
    •Working date
    •Title of showy
    •Shot code system
    •Description of shot
    •Camera framing details
    •Length of shot (roughly)
    •Any notes



    Shotlist Code
    •ECU : Extreme close up
    •CU : Close up
    •MS : Medium shot
    •LS : Long Shot
    •VLS : Very long shot
    •ELS : Extreme long shot

    Running Sheet
    •Working date
    •Equipment list
    •Cast list
    •Props list
    •Schedule for the day
    •Any important reminders / notes



    Location
    •Location refers to the place that you video tape the project. There are generally two types of location:
    1) sets
    2) remote location

    Casting
    •Casting is the process of determining which person will play each role in the project.

    Budgeting
    •Stick to budget no matter what
    •Make sure everyone knows what the budget limits
    •Keep track of every expenses

    6 November 2010

    Audio Equipment

    Introduction Of Audio System
    Modern audio system creates
    sound by utilizing modern
    electronic ingredients
    • Three elements of an audio system:
    – Source
    – Amplification
    – Output



    High Fidelity (Hi-fi)


    • Fidelity is the accuracy with which a system reproduces the original signal fed to it.
    • High Fidelity is the technique of recording, broadcasting and reproducing sound to match the
      characteristic of the original sound
    • The goal of hi-fi is to reproduce an identical set of sound vibration
    • It must be able to span the entire human hearing frequency range


    Microphones


    • Microphones are transducers which detect sound signals and produce an electrical image of the
    sound, i.e., they produce a voltage or a current which is proportional to the sound signal.
    • The most common microphones for musical use are dynamic,
    ribbon, or condenser microphones.
    • Besides the variety of basic mechanisms, microphones can be designed with different directional patterns




    Type Of Enclosure


    The production of a good high fidelity loudspeaker requires that the speakers be enclosed because
    of a number of basic properties of loudspeakers.
    • Just putting a single dynamic loudspeaker in a closed box will improve its sound quality dramatically.

    Digital Audio And Sound Application

    Sample Rate
    Taking more samples allows the “sampling" process to more closely approximate the curve of the original, analog wave, and therefore get closer to reproducing the sound digitally

    Also known as Sampling Frequency
    E.g:
    • 44KHz: CD quality sound
    • 22KHz: OK for music
    • 11KHz: OK for voice
    • 5 KHz: A.M. radio
    Sample Size
    • Sample size is either 8-bit or 16-bit; this naming scheme describes the amount of computer space allotted to store data gathered in each sample
    • Also known as Bit Depth / Sample Resolution
    • The more bits used to represent the amplitude, the greater the dynamic range that can be represented

    Analog To Digital Converter


    1. Here is an analog sound wave. Analog sound is continuous variation in air pressure.
    2. To digitize sound, samples are taken at even intervals of time.
    3. These samples are trimmed to the nearest value and encoded in binary.

    Sound File


    • Sound files contain large amounts of data, and uncompressed, they are huge.
    • A sound file generally has audio data and metadata
    • Audio data is the sound that you hear
    • Metadata can include the name of the sound file, its size, duration, number of channels, resolution or sample size (in bits), sampling rate (in kilohertz), type of compression, information about licensing or streaming, special instructions, or other text or graphics.

    Amplitude Envelope
    • When a mechanical musical instrument produces sound, the relative volume of the sound produced changes over time
    • The way that this varies is different from instrument to instrument
    • Example: A guitar, by contrast, is loudest immediately after it is played, and fades with time
    • Shaping of the sound's amplitude profile is realized with an "ADSR" (Attack Decay Sustain Release) envelope model
    • The ADSR envelope is a parameter used in synthesizers to control the sound produced




    • Attack: How quickly the sound reaches full volume after the sound is activated (the key is pressed).
    • Decay: How quickly the sound reduces in volume after the initial peak.
    • Sustain: The "constant" volume that the sound takes after decay until the note is released.
    • Release: How quickly the sound fades after the end of the note (the key is released). Often, this time is very short.
    Stereophonic
    • It is the study of multichannel, 3D sound and the electronic audio equipment used to reproduce it.
    • It is a way to recreate a sound stage, including the ability of the listener to determine the original source location of specific sounds.
    • (stereois ‘3D’ and phonicis ‘the science of sound’)
    • Before stereophonics, there was monophonicwhich only utilized one channel of recording and playback

    Channels
    • A channel is a single path for transmitting electrical signal
    • One channel audio system = 1 source, 1 recording channel, 1 amplifier & 1 speaker
    • Multichanneling makes several recordings of the same sounds
    • Its like having two or more tape running simultaneously
    • The channels are recorded with more than one microphone thus the channels are not exact duplicates of each other.

    Creating Stereo
    • Stereo theoretically separates each sound source and places it in 3 dimensions
    • E.g. Guitar on the left, piano to the right and a singer centered.
    • Two microphones are recording the sound pressures which placed at a distance from each other
    • Usually reside in front of instruments or voices being recorded
    • Each microphone is recording one track on the same audio tape. The two tracks then played by two separate speakers.
    Law of the First Wave Front
    • The first sound to arrive at the ears determines the perception of direction to the source.
    Reverberation
    • Reverberation consists of the random sounds that surround the listener in a live concert hall experience
    • It is the hidden equation in stereo imaging
    • These are the sounds that are launched out to the audience, auditorium, concert hall or studio and are bounced back to the microphones that are recording two tracks.
    Surround sound

    • Surround sound is a system that enhances the spatial imaging capabilities of the playback system
    • To create a sound field that can surround the audience with direct and ambient sound from all directions
    • Example:  Pro Logic, 4 Channel and 5, Speaker-Dolby Digital
    Speech Synthesis
    • Speech synthesis is the artificial production of human speech.
    • It can be implemented in software or hardware.
    • Speech synthesis systems are often called text-to-speech (TTS) systems in reference to their ability to convert text into speech
    • TTS is composed of two parts: a front end and a back end